Catalina Graphic Films

You are here: Home Pressure-Sensitve Materials Vinyls Intermediate Vinyl CV400FWR/GR
(0 votes)
3.5 MIL WHITE FLEXIBLE VINYL
WITH A GRAY REMOVABLE ACRYLIC ADHESIVE AND A 90# STAYFLAT LINER

ADHESIVE LINER FINISH WEIGHT PER MSI WIDTH
R36 90# Matte .50# 54”
60"

  • Description: A flexible matte white calendered film coated with a gray removable pressure sensitive adhesive and a 90# release liner.
  • Application: This product line is intended for use in the production of high quality interior and exterior graphics requiring block out or opaque film. Some possible uses are for bumper stickers, POP decals, fleet markings and decals.
  • Print Methods: Solvent or UV curable screen printing inks
  • Face Film: 3.4 ± 0.2 mils matte top coated white flexible vinyl
  • Adhesive: R36 gray acrylic pressure activated permanent
  • Liner: 90# (6.5 ± 0.2 mils) white polyethylene coated two side-silicone coated one side paper.
  • Total Product Thickness: 10.5-11.5 mils
  • Minimum Application Temperature: +40° F.
  • Service Temperature Range: -20° F. To +150° F.
  • Expected Outdoor Life: Three to five years mid-continental USA vertical exposure
  • Adhesion: 7.0 ± 2 oz/in
    (180° adhesion from SS, 20 minute room temperature dwell)
  • Water Resistance: Excellent
  • Solvent Resistance: Good for most petroleum based solvents. Edge sealing is recommended in high solvent exposure areas
  • Shelf Life: One year when stored under conditions of 70°F and 50% relative humidity.
  • Standard Roll Lengths: 54” x 100 YDS
    54” x 250 YDS
    54” x 500 YDS
    60” x 100 YDS
    60” x 250 YDS
    60” x 500 YDS
  • Standard Sheet Sizes: 20” x 27”
    27” x 38”
  • Can be custom converted to meet your requirements: Yes
  • Product Overview
  • Specifications
  • Gallery
3.5 MIL WHITE FLEXIBLE VINYL
WITH A GRAY REMOVABLE ACRYLIC ADHESIVE AND A 90# STAYFLAT LINER

ADHESIVE LINER FINISH WEIGHT PER MSI WIDTH
R36 90# Matte .50# 54”
60"

Additional Specifications

  • Description: A flexible matte white calendered film coated with a gray removable pressure sensitive adhesive and a 90# release liner.
  • Application: This product line is intended for use in the production of high quality interior and exterior graphics requiring block out or opaque film. Some possible uses are for bumper stickers, POP decals, fleet markings and decals.
  • Print Methods: Solvent or UV curable screen printing inks
  • Face Film: 3.4 ± 0.2 mils matte top coated white flexible vinyl
  • Adhesive: R36 gray acrylic pressure activated permanent
  • Liner: 90# (6.5 ± 0.2 mils) white polyethylene coated two side-silicone coated one side paper.
  • Total Product Thickness: 10.5-11.5 mils
  • Minimum Application Temperature: +40° F.
  • Service Temperature Range: -20° F. To +150° F.
  • Expected Outdoor Life: Three to five years mid-continental USA vertical exposure
  • Adhesion: 7.0 ± 2 oz/in
    (180° adhesion from SS, 20 minute room temperature dwell)
  • Water Resistance: Excellent
  • Solvent Resistance: Good for most petroleum based solvents. Edge sealing is recommended in high solvent exposure areas
  • Shelf Life: One year when stored under conditions of 70°F and 50% relative humidity.
  • Standard Roll Lengths: 54” x 100 YDS
    54” x 250 YDS
    54” x 500 YDS
    60” x 100 YDS
    60” x 250 YDS
    60” x 500 YDS
  • Standard Sheet Sizes: 20” x 27”
    27” x 38”
  • Can be custom converted to meet your requirements: Yes

Catalina Graphic Films

#1 Source for Pressure-Sensitive Materials

Corporate Headquarters
27001 Agoura Road, Suite 100
Calabasas Hills, CA 91301
Toll-Free: (800) 333-3136
Tel: (818) 880-8060
Fax: (818) 880-1144

VIP Online Login

Username
Password

Forgot Password